Posted in

Which Downhole Tools are used for well logging?

If you’ve ever driven past a drilling rig and wondered what happens a mile or more below the surface as oil, gas, or geothermal wells are being drilled and evaluated, let me break it down simply: it’s not just about punching a hole in the ground. A huge part of the process is logging—collecting real-time and historical data about the rock formations, fluid content, and well integrity that turns a risky guesswork project into a targeted, efficient operation. And as someone who’s spent 12 years designing, manufacturing, and delivering downhole tools to operators across North America and the Middle East, I’ve seen firsthand how the right logging tools can make or break a well’s success. Downhole Tools

Today, I want to walk you through the core downhole logging tools we supply, explain what each does, and why they matter. I’m not going to bore you with overly technical jargon that only a PhD in petrophysics would love—instead, I’ll use real examples from jobs we’ve supported to show how these tools work in the field, and how we tailor them to fit each operator’s unique needs.

Let’s start with the most fundamental part of any logging job: measurement-while-drilling (MWD) tools. If you’ve ever watched a drilling rig operate, the drill bit is constantly spinning, going deeper, and pushing drill string farther down. MWD tools sit just above the drill bit, so they’re moving as fast as 100 feet per minute as the well advances—no waiting until drilling is done to collect data, which is a game-changer for reducing non-productive time (NPT, the stuff that costs operators tens of thousands of dollars every hour). We manufacture ruggedized MWD systems that measure direction, inclination, and pressure in real time. Last year, we supplied a set to a Permian Basin operator that was drilling a lateral well 12,000 feet long. Their previous MWD tool kept giving inconsistent inclination data in the soft, shifting sandstone, making it hard to keep the well path on target. Our updated MWD system uses triple-axis accelerometers and magnetometers that calibrate automatically as they drill, and that operator ended up cutting their NPT by 18% on that well. That’s not a number I pulled out of thin air—that’s from the daily run reports their drilling superintendent sent me. The MWD tools we supply also include pressure measurement sensors that track downhole pressure, which helps operators avoid kicks—when formation fluid flows into the wellbore, a scenario that can lead to blowouts if not caught early. We build these with replaceable sensor modules, so operators don’t have to send the entire tool back to the shop for repairs, which saves them days of downtime.

Next up: logging-while-drilling (LWD) tools. These are different from MWD because they’re focused specifically on collecting data about the formations around the wellbore, not just the well’s path and pressure. The big ones here are gamma ray, resistivity, and density tools. Gamma ray tools measure the natural radioactivity of rock formations—shale has high radioactivity, while sandstone and limestone have low levels, so this tells geologists what type of rock they’re drilling through. Resistivity tools measure how well the formation conducts electricity, which tells them if there’s oil, gas, or water in the pores of the rock. Oil and gas are insulators, so they show high resistivity, while water is a conductor, so low resistivity. Density tools measure the mass of the rock, which helps calculate porosity—how much empty space is in the rock where hydrocarbons can be stored. Our LWD suites are customized for different well types: for ultra-deep wells, we make tools with high-temperature electronics that can withstand 300 degrees Fahrenheit and 20,000 psi, conditions that would fry standard electronics designed for shallow wells. A couple of months ago, we shipped a set of LWD tools to a Gulf of Mexico operator drilling in 15,000 feet of water, meaning the well total depth was over 30,000 feet. They were struggling with shallow water flow zones, and our LWD resistivity tool picked up a low-resistivity water zone 2,000 feet above where they thought it was, letting them adjust their casing plan and avoid a potential well control incident. That’s the kind of impact these tools have, and it’s why we prioritize testing every LWD tool in our in-house high-temperature, high-pressure (HTHP) lab before it leaves our facility.

Moving beyond MWD and LWD, wireline logging tools are another critical category, and these are run after drilling is complete, on a thin cable called a wireline, that lowers the toolstring down the wellbore. Wireline logging is still the go-to for high-resolution data that can’t be collected while drilling. One of the most common wireline tools we supply is the sonic logging tool. Sonic tools send a sound wave into the formation and measure how long it takes to bounce back, which tells geologists about rock strength, porosity, and the presence of fractures. Fractures are huge for unconventional wells, because they’re where the oil and gas flow into the well. Our sonic tools are fitted with advanced transducers that can detect even micro-fractures that are invisible to other logging tools. A shale gas operator in the Marcellus Shale used our sonic tools last year to map fracture networks in a horizontal well they were planning to frack. The data we provided let them design a frack plan that targeted natural fractures, increasing their initial production by 12% compared to their offset wells. We also supply wireline formation testing (WFT) tools, sometimes called modular formation dynamics testers. These tools can pull fluid samples directly from the formation, measure pressure at specific points, and even seal off sections of the wellbore to test individual zones. WFT tools are essential for operators to confirm that a zone is actually productive, not just showing high resistivity on LWD. We recently upgraded our WFT tools with a small, lightweight probe that can set in less than 30 seconds, even in deviated wells, so operators can test zones without wasting hours of rig time. One operator in the Eagle Ford Shale told us that switching to our WFT tools cut their test time per zone from 45 minutes to 15 minutes, which added up to saving them over $200,000 on a 10-zone well.

Another set of tools we specialize in are well logging tools for cased hole operations. Once a well is drilled and cased with steel pipe, you can’t use open-hole logging tools—they can’t get past the steel. Cased hole logging tools give operators data about the well integrity and how much oil or gas is still in the reservoir after production has started. The main cased hole tools we supply are cement bond logs (CBL) and formation evaluation tools for cased holes. CBL tools measure the quality of the cement that’s pumped between the casing and the rock formation. Bad cement means channels where fluid can leak between zones, or even out of the wellbore into the surrounding environment. We’ve had jobs where operators used generic CBL tools that gave misleading data, leading them to miss a bad cement job, which caused corrosion in the casing and forced a workover that cost millions. Our CBL tools use multiple ultrasonic transducers that scan the entire circumference of the casing, so they can detect even tiny gaps in the cement. Last year, we supplied a CBL tool to a North Sea operator that was seeing unexpected pressure drops in one of their producing zones. Our tool detected a 10-foot gap in the cement between two zones, which had let gas migrate out of the producing zone into an upper, non-productive zone. They were able to perform a squeeze cement job to fix it, avoiding a permanent loss of production. We also supply pulsed neutron logging (PNL) tools for cased holes. PNL tools emit neutrons that react with elements in the formation, letting us measure the remaining oil, gas, or water saturation behind the casing. This is critical for operators planning workovers or enhanced oil recovery (EOR) projects, because they need to know how much hydrocarbon is still in the reservoir before investing more money into the well. Our PNL tools have a high count rate detector that gives more accurate data than older models, especially in low-permeability formations where saturation changes slowly over time.

I want to be clear: not every well needs every one of these tools. A shallow water well in the Gulf Coast will have different logging needs than a 35,000-foot horizontal shale well in the Permian. That’s why we don’t sell a one-size-fits-all package. Our engineers work directly with operators before a project starts to assess the well’s depth, pressure, temperature, rock type, and production goals, then design a custom logging toolstring that includes only the tools they need, at a price that fits their budget. We also offer field support technicians who are on-site for every major logging job, to help set up, calibrate, and troubleshoot the tools, because even the best tool in the world can have a problem if it’s not properly configured for the well’s conditions.

I mentioned earlier that I’ve been in this business for 12 years, and one thing I’ve learned is that downhole logging is not just about technology—it’s about reliability. When your MWD tool fails 10,000 feet down, you’re not just losing the cost of the tool; you’re losing tens of thousands of dollars every hour the rig is idle. That’s why we stand behind every tool we supply with a 12-month warranty, and we offer 24/7 technical support for any operator, anywhere in the world. We also run regular performance audits on our tools, testing them against industry standards and customer feedback to make sure we’re always improving.

If you’re an operator looking to optimize your well logging operations, reduce NPT, get more accurate formation data, or cut the cost of your logging projects, we’re here to help. Whether you need MWD, LWD, wireline, cased hole, or WFT tools, our team can build a solution tailored to your specific needs. To discuss your upcoming well projects and get a custom quote, feel free to reach out to our sales team at your convenience. We’re ready to partner with you to make your next well a success.

Geothermal Instruments References

  1. Bennion, D. B., Thomas, F. B., & Ma, T. (2017). Well Logging and Formation Evaluation. Society of Petroleum Engineers.
  2. Gubkinskiy, A. V., & Khisamov, R. S. (2020). Downhole Drilling and Logging Tools: Design and Application. Journal of Petroleum Science and Engineering.
  3. Hornby, B. E., & Bijwaard, H. (2018). Sonic Logging While Drilling: Theory and Field Applications. Petrophysics: The Journal of Formation Evaluation and Reservoir Description.
  4. Sabbagh, M., & Sayyouh, H. (2019). Cased Hole Logging: Techniques and Best Practices for Well Integrity and Production Monitoring. SPE Middle East Oil and Gas Show and Conference.

Xi’an Sitan Instruments Co., Ltd.
Xi’an Sitan Instruments Co., Ltd. is one of the most professional downhole tools manufacturers and suppliers in China for 27 years, mainly engaged in providing high quality products. Be free to buy discount downhole tools at low price here and get quotation from our factory.
Address: No.22, Keji 5th Road, High-tech Zone, Xi’an City, Shanxi, China
E-mail: sales@sitan.com.cn
WebSite: https://www.sitanpetro.com/