{"id":939,"date":"2026-11-22T00:34:07","date_gmt":"2026-11-21T16:34:07","guid":{"rendered":"http:\/\/www.tanitbennajash.com\/blog\/?p=939"},"modified":"2026-11-22T00:34:07","modified_gmt":"2026-11-21T16:34:07","slug":"how-do-i-store-coextruded-film-properly-4f57-f8a216","status":"publish","type":"post","link":"http:\/\/www.tanitbennajash.com\/blog\/2026\/11\/22\/how-do-i-store-coextruded-film-properly-4f57-f8a216\/","title":{"rendered":"How do I store coextruded film properly?"},"content":{"rendered":"<p>As a coextruded film supplier who\u2019s spent the last 12 years working with these materials\u2014sitting in warehouses, troubleshooting storage issues with clients, and even handling my fair share of damaged stock early on\u2014I can tell you this: proper storage isn\u2019t just a \u201cnice-to-have\u201d for coextruded film. It\u2019s what keeps your product performing as intended, cuts waste, and saves you hundreds (if not thousands) in unexpected costs. I\u2019ve seen a 3-month-old roll of high-barrier film turn into a stretchy, tear-prone mess because someone left it leaning against a loading dock, and I\u2019ve also watched a client\u2019s inventory stay in perfect condition for 18 months because they followed a simple, consistent storage routine. Let\u2019s break down exactly how to get it right, no fancy tricks required. <a href=\"https:\/\/www.barrierpackage.com\/coextruded-film\/\">Coextruded Film<\/a><\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.barrierpackage.com\/uploads\/43492\/page\/small\/orange-base-trap-printing-film77441.jpg\"><\/p>\n<p>First, let\u2019s ground this in what coextruded film is, because that context makes every storage rule make sense. Unlike single-layer films (like basic polyethylene stretch wrap), coextruded films are made by melting and pressing two or more polymer layers together\u2014often adding materials like EVOH for oxygen barrier, nylon for puncture resistance, or adhesion layers to bond the whole structure. Each layer has its own properties: some are sensitive to UV light, some soften at specific temperatures, some absorb moisture over time which ruins their barrier performance. So when you store this, you\u2019re not just keeping a piece of plastic safe\u2014you\u2019re protecting a multi-layer system that\u2019s been engineered for a specific job, whether that\u2019s packaging fresh produce, pharmaceuticals, or industrial parts.<\/p>\n<p>Let\u2019s start with the biggest environmental factors that damage coextruded film, and how to control them. Temperature is number one on the list. I can\u2019t tell you how many clients have asked me, \u201cCan we just store these rolls in the back of our warehouse where it\u2019s a little cooler?\u201d and then their film warps or develops creases. The sweet spot for coextruded film storage is a consistent 50 to 70 degrees Fahrenheit (10 to 21 degrees Celsius). Why? Most polymer layers in coextruded blends have a glass transition temperature (Tg)\u2014the point where a plastic shifts from rigid to flexible\u2014around 0 to 50 degrees F. If storage drops below that, the film becomes brittle, easy to crack during slitting or processing. If it climbs above 70 degrees, the layers start to separate a process called delamination, or the film stretches out of shape, leading to uneven thickness when you go to convert it. I\u2019ve even seen rolls left in a hot delivery truck for a week arrive so soft they unspooled on their own. To make this work, invest in inexpensive thermometers for your storage area\u2014digital ones with a remote probe work well, so you can check temperatures in the back and near doors without moving rolls. If your warehouse runs too cold in winter, a small space heater (placed away from flammable materials, obviously) near storage racks fixes it. If it\u2019s too hot in summer, proper insulation or even a portable AC unit for the storage zone is a small cost compared to replacing a pallet of damaged film.<\/p>\n<p>Next, humidity. This is a hidden culprit, especially for films with hygroscopic layers. Many coextruded films include EVOH, a polymer that absorbs water vapor at a rate I didn\u2019t fully understand early in my career. I once had a client reject a 5,000-pound roll of high-barrier film because their oxygen retention test failed\u2014turns out, their warehouse had 80% humidity, and the EVOH layer had absorbed enough moisture to cut its barrier performance by 40%. The fix? Keep storage humidity between 40% and 55% relative humidity. How do you manage this? For most warehouses, a dehumidifier works perfectly for standard storage areas. If you\u2019re dealing with a particularly moisture-sensitive film\u2014say, one used for packaging sterile medical devices\u2014store it in sealed desiccant bags or climate-controlled cabinets. I also recommend avoiding storing coextruded film near areas that generate moisture: loading docks with hoses, break rooms with dishwashers, or outside walls that sweat in humid months. Even a single leaky pipe above your storage rack can ruin a whole pallet, so do a quick monthly check for any water stains or damp spots.<\/p>\n<p>Light, specifically UV light, is another damage factor that\u2019s easy to overlook. Coextruded films for packaging are often opaque or tinted, but even clear films can break down if exposed to direct sunlight or harsh fluorescent lighting for long periods. UV radiation breaks down polymer chains, leading to brittleness, yellowing, and reduced strength. I\u2019ve noticed that rolls stored near warehouse windows start to show tiny tears along their edges after just 2 months, while rolls stored in the center of the same rack stay intact for 6 months. The rule here is simple: keep coextruded film in a dark area, away from direct sunlight and unshipped lighting. If you have to store film near windows, cover the rolls with opaque tarps or UV-protective shrink wrap (yes, that\u2019s a thing) to block the light. And never leave rolls sitting on a loading dock or patio for more than a few hours\u2014even on a cloudy day, UV radiation passes through clouds and will harm the film over time.<\/p>\n<p>Now, how you physically handle and arrange the rolls is almost as important as the environment. First, never store coextruded film rolls flat on the floor, and never stand them on their narrow edges leaning against a wall. I learned this the hard way early on: a client stored a pallet of rolls flat for 2 months, and the weight of the top rolls pressed down on the bottom ones, causing permanent creases that showed up when they ran the film through their packaging machine. Another client leaned rolls against a loading dock, and the weight of the roll bent the inner core, leading to lopsided unspooling that jammed their line. The correct way is to store rolls vertically, with their core standing upright, on sturdy, adjustable racks. The racks should be wide enough to support the full length of the roll\u2019s core\u2014no overhang\u2014and spaced so that there\u2019s at least 6 inches of space between the top of the roll and the ceiling. This prevents crushing and also allows air to circulate around each roll, which stops moisture buildup on the outer layers.<\/p>\n<p>If you\u2019re stacking rolls (and sometimes you have to, to save space), the rule is: never stack more than 4 rolls high, and always stack smaller rolls on top of larger ones. Large, heavy rolls (like 48-inch wide, 1,000-pound rolls) can crush smaller, lighter ones if they\u2019re placed on top. And make sure the rolls are centered\u2014off-center stacking leads to uneven pressure, which causes the film to warp along one edge. I also recommend using pallet supports or wooden skids under your racks if you\u2019re stacking on the floor (though I still prefer racks) to keep rolls off the concrete, which is often damp in warehouses and can cause the outer layers to absorb moisture over time.<\/p>\n<p>Another key handling tip: rotate your inventory. It\u2019s called \u201cfirst in, first out\u201d (FIFO), and it\u2019s non-negotiable for coextruded film. Polymer layers can degrade over time even in ideal storage conditions\u2014usually about 12 to 18 months, depending on the film type. I\u2019ve had a client pull a roll that was 2 years old, and it had lost 25% of its puncture resistance, which led to product spoilage during shipping. To avoid this, label every roll with its incoming date and a \u201cuse by\u201d date (you can get that information from your supplier\u2014we add it to all our shipping labels). When a new shipment comes in, put it behind the older rolls, so workers grab the oldest ones first. I know it\u2019s tempting to use the newer rolls first, but that\u2019s a fast way to end up with a pile of expired, unusable film.<\/p>\n<p>What about specific scenarios? Let\u2019s talk about two common ones clients ask me about: short-term storage (a week to a month) and long-term storage (over 6 months). For short-term storage, the rules are almost the same, just a little more flexible, as long as you avoid the big no-nos. If you\u2019re moving rolls between warehouses or storing them in a temporary space, just make sure they\u2019re not exposed to extreme temperatures or direct sunlight, and keep them off the floor. If you have to store them outside (which I don\u2019t recommend, but sometimes it happens), cover them with a heavy-duty waterproof tarp, elevated on pallets, and check them daily for moisture or temperature buildup.<\/p>\n<p>For long-term storage, you\u2019ll need to add a few extra steps. First, when you receive a shipment that\u2019s going to be stored for more than 6 months, ask your supplier if the film should be resealed. We ship all our film in sealed, moisture-resistant plastic bags, but over time, those bags can develop tiny tears, especially if they\u2019re being moved. If you\u2019re not going to process the film within 3 months of receiving it, open the shipping bags, inspect each roll for damage, then re-seal them in new moisture-proof bags with a small packet of desiccant to absorb any excess humidity. Also, check the storage area regularly\u2014once a month, if you can\u2014to look for any signs of pests, mold, or temperature spikes. Pests like mice love to chew through plastic film, and mold can grow if humidity is too high, both of which ruin the film completely.<\/p>\n<p>I also need to cover what mistakes I see most often, because they\u2019re easy to make. One big one is using pallets that are too flimsy. Cheap, thin plastic pallets can warp under the weight of heavy coextruded film rolls, leading to rolls tipping or bending. Invest in sturdy wooden or HDPE pallets that can support at least 1,500 pounds\u2014enough for even the largest rolls. Another mistake is storing film near chemicals or other products that emit fumes. Some coextruded films, especially those used for food packaging, are sensitive to volatile organic compounds (VOCs) from things like cleaning supplies, paint, or even certain types of plastic containers. Fumes can seep into the film and change its taste or barrier properties, which is a huge problem for food or pharmaceutical applications. Keep film storage zones at least 10 feet away from any chemical storage, paint supplies, or cleaning areas.<\/p>\n<p>Wait, what about during transportation? A lot of people ask me if storage rules apply during shipping, and the answer is yes. Even a day or two in a hot truck can damage film. When we ship our coextruded film, we use climate-controlled trucks for long distances in extreme temperatures, and we wrap rolls in UV-protective shrink wrap. If you\u2019re receiving film from a supplier, inspect every roll when it arrives: check for creases, warping, or discoloration, and test a small sample to make sure the barrier strength or thickness is what\u2019s ordered. If you notice damage, report it immediately to your supplier\u2014most of us have a 7-day inspection window for shipments, and we\u2019ll replace any damaged film at no cost.<\/p>\n<p>Let me share a recent example to put this all in perspective. A client of mine who runs a fresh produce packaging facility called me last year, panicking because they had 10 pallets of coextruded film that had gone bad. They\u2019d stored them in a side of their warehouse near a loading dock, and during a summer heatwave, the temperature hit 82 degrees, and humidity spiked to 75%. The film\u2019s EVOH layer had absorbed moisture, so the oxygen barrier was useless\u2014their produce was spoiling 2 days earlier than expected, and they were losing thousands in product. We worked with them to move the remaining film to a climate-controlled storage area, add dehumidifiers, and adjust their FIFO system. Within 2 months, their film was performing as good as new, and they cut their film waste by 60%. It\u2019s a small adjustment, but it made a huge difference.<\/p>\n<p>Now, I know this sounds like a lot, but it\u2019s all manageable with a little consistency. The core takeaway is this: control temperature, humidity, and light, store rolls vertically on sturdy racks, rotate your inventory with FIFO, and avoid exposing the film to moisture, chemicals, or extreme conditions. If you stick to these rules, your coextruded film will perform as engineered, waste will drop, and you won\u2019t have to deal with the headache of damaged inventory.<\/p>\n<p><img decoding=\"async\" src=\"https:\/\/www.barrierpackage.com\/uploads\/43492\/page\/small\/inner-printing-pvdc-filmdbc7f.jpg\"><\/p>\n<p>If you\u2019re dealing with coextruded film storage challenges\u2014whether you\u2019re troubleshooting a current batch, needing guidance for a specific film type, or looking for storage solutions tailored to your facility\u2014reach out to me. I\u2019ve worked with hundreds of clients across industries, and I can help you set up a storage routine that fits your needs, no matter the size of your operation. I\u2019m here to make sure your film stays in perfect condition, so your packaging runs smoothly and your products get to customers safely.<\/p>\n<p><a href=\"https:\/\/www.barrierpackage.com\/polyvinylidene-chloride-film\/polyvinylidene-chloride-printing-film\/\">Polyvinylidene Chloride Printing Film<\/a> References<\/p>\n<ol>\n<li>Owens, W. L. (2019). Handbook of Coextruded Films: Properties, Processing, and Applications. Plastics Engineering Society.<\/li>\n<li>International Organization for Standardization (ISO). (2021). ISO 11607-2: Packaging for Terminally Sterilized Medical Devices \u2013 Part 2: Validation and Requirements for Forming, Sealing, and Assembly Processes.<\/li>\n<li>American Society for Testing and Materials (ASTM). (2020). ASTM D4321-20: Standard Practice for Packaging and Storage of Plastic Film and Sheeting.<\/li>\n<li>Patel, R. (2022). \u201cMoisture Absorption in EVOH Barrier Films: Impact on Packaging Performance.\u201d Journal of Flexible Packaging Technology, 8(3), 145-162.<\/li>\n<\/ol>\n<hr>\n<p><a href=\"https:\/\/www.barrierpackage.com\/\">Sinosealed Packaging Solutions Limited<\/a><br \/>With a professional production team, we are one of the most experienced coextruded film manufacturers and suppliers in China. Please rest assured to buy high quality coextruded film for sale here from our factory. For price consultation, contact us.<br \/>Address: Luohe City, Henan Province, China<br \/>E-mail: contact@barrierpackage.com<br \/>WebSite: <a href=\"https:\/\/www.barrierpackage.com\/\">https:\/\/www.barrierpackage.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"<p>As a coextruded film supplier who\u2019s spent the last 12 years working with these materials\u2014sitting in &hellip; <a title=\"How do I store coextruded film properly?\" class=\"hm-read-more\" href=\"http:\/\/www.tanitbennajash.com\/blog\/2026\/11\/22\/how-do-i-store-coextruded-film-properly-4f57-f8a216\/\"><span class=\"screen-reader-text\">How do I store coextruded film properly?<\/span>Read more<\/a><\/p>\n","protected":false},"author":482,"featured_media":939,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[902],"class_list":["post-939","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-coextruded-film-4e26-f96031"],"_links":{"self":[{"href":"http:\/\/www.tanitbennajash.com\/blog\/wp-json\/wp\/v2\/posts\/939","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.tanitbennajash.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.tanitbennajash.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.tanitbennajash.com\/blog\/wp-json\/wp\/v2\/users\/482"}],"replies":[{"embeddable":true,"href":"http:\/\/www.tanitbennajash.com\/blog\/wp-json\/wp\/v2\/comments?post=939"}],"version-history":[{"count":0,"href":"http:\/\/www.tanitbennajash.com\/blog\/wp-json\/wp\/v2\/posts\/939\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.tanitbennajash.com\/blog\/wp-json\/wp\/v2\/posts\/939"}],"wp:attachment":[{"href":"http:\/\/www.tanitbennajash.com\/blog\/wp-json\/wp\/v2\/media?parent=939"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.tanitbennajash.com\/blog\/wp-json\/wp\/v2\/categories?post=939"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.tanitbennajash.com\/blog\/wp-json\/wp\/v2\/tags?post=939"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}